Katameya Complex, Factory 13M, Mohamed Ezzat Adel Road, Katameya, Cairo ISO 9001:2015 and ISO 14001:2015 certified العربية
Creative Partners

MPPT or PWM: choosing a Morningstar controller for remote sites

When MPPT pays for itself, and when a PWM controller is the better choice.

Published

Both controller types protect the battery. The difference is what they do with the array voltage.

How PWM works

A PWM controller connects the array to the battery and switches it on and off to hold the charging voltage. The array is pulled down to battery voltage, so it only performs well when the module is designed for that battery voltage, such as a 36-cell module on a 12 V battery.

How MPPT works

An MPPT controller converts the array's higher voltage into extra charging current, and keeps tracking the point where the array gives the most power. That lets you use higher-voltage modules, put modules in series, and run thinner cables over longer distances.

What heat changes

Module voltage drops as cells get hot. In desert summers the harvest advantage of MPPT over a well-matched PWM system is smaller than in cold climates. The design freedom remains: series strings, standard 60 and 72-cell modules and less copper.

A practical rule

- Small, matched systems, such as a single module charging a 12 V battery for a sensor or radio: PWM (SunSaver, ProStar) is simple and robust. - Larger systems, high-voltage modules or long cable runs: MPPT (SunSaver MPPT, ProStar MPPT, TriStar MPPT, GenStar MPPT). - Arrays far from the shelter: TriStar MPPT 600V, which accepts up to 600 V open-circuit.

Every Morningstar product page on this site links to the manufacturer's datasheet. Send us your load and site details and we will recommend the model.

More articles

Need a datasheet, a sizing check or a price?

Send us the load and the site conditions. An engineer replies, not a call centre.